Welcome To Our New Website

#1 Source For Highest Quality Automotive Finishes

Safe & Secure Shopping

Search
Account
Wishlist
0
Cart
 
FUEL PRESERVATIVE & STABILIZER
Item Number: FPS-01

 Be the first to review this item  

Size/Color

Quantity
- +


FPS-01
FUEL PRESERVATIVE & STABILIZER
$25.00
  • Description
  • Review

Prevents gum, varnish formation and corrosion in fuel tanks and fuel systems.
Absolutely a must for cars, boats, planes or any other equipment where the fuel sits idle in a tank for 30 days or more.

One ounce of this product will keep 3 gallons of fuel fresh for at least 3 years.

Contains no alcohol that attacks some metals.


Will not attack rubber parts of diaphrams as most other do. Unlimited shelf life. Safe for all 2 or 4 cycle engines. One quart will protect 100 gallons of fuel for over 3 years. Retards decaying of ethanol fuels.

This fuel preservative prevents gum, varnish formation and corrosion in fuel tanks and fuel systems. This gas stabilizer contains no alcohol that attacks some metals.

Product Highlights:

Prevents & Stops Decay: Specifically formulated to stop the formation of gum and varnish and prevent fuel system corrosion.

Long-Term Protection: Provides up to 36 months of storage protection for your fuel.

High Efficiency: One quart (946 ml) treats up to 96 gallons (363 liters) of fuel.

Versatile Compatibility: Safe for all types of vehicles and power equipment, including 2-cycle and 4-cycle engines. Internal Engine

Coating: Beyond stabilization, it coats and lines the interior of engine parts with a protective layer. Prevents Oxidation: Stops fuel from breaking down due to oxygen exposure, which typically begins after just one month of sitting idle.

Usage & Directions Standard Dosage: Add 1 oz. (30 ml) of stabilizer for every 3 gallons (12 liters) of fuel. Full Tank Recommended: For best results, treat a full tank of fuel to prevent condensation during storage. Mix Thoroughly: After adding the product, run the vehicle or equipment for 5 to10 minutes to ensure the stabilizer has mixed completely with the fuel. Broad Application: Recommended for motorcycles, mopeds, snow-blowers, lawnmowers, chain saws, generators, tractors, and aircraft or marine engines.

Cleaning Properties: Use in dosages greater than prescribed can help loosen and dissolve existing scale and rust within the fuel tank. Important Safety & Handling Paint Protection: This product may mar paint finishes; if an accidental spill occurs, wash immediately with water. Storage: Store at room temperature in a cool place away from fire or open flames. Pre-existing Stale Fuel: If fuel in the tank is already stale, it should be removed and replaced with fresh fuel before adding the stabilizer.

 Review Average:    Number of Reviews: 0  View ReviewsReview this item